Nickel Copper Alloy Monel 400 Bar

Model NO.: Copper Nickel Alloy Material: Ni,Cu,Al,Ti,Fe,Mn,S,C,Si Surface: Bright Brand Name: Wisdom Quality Test: Mill Test Report Specifications: Uns N05500/W.Nr 2.4375 Ni (Min): 63.0 Specification: CE, ISO9001, ROHS, SGS Product Type: Wire Strip Ribbon Bar Sheet Treatment: Hydrogen Annealing Condition: Soft Product: Copper Nickel Alloy Certificate: ISO9001 Paument Currency: USD/Eur/RMB Trademark: WISDOM Origin: Shanghai, China
Introduction
Monel 400 is a nickel-copper alloy that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, Monel 400 is rapidly attacked by nitric acid and ammonia systems.

Typical Uses and Applications
Monel 400 is widely used in many fields, especially marine and chemical processing. Typical applications
are valves and pumps; pump and propeller shafts; marine fixtures and fasteners; electrical and electronic
components; springs; chemical processing equipment; gasoline and fresh water tanks; crude petroleum stills,
process vessels and piping; boiler feedwater heaters and other heat exchangers; and deaerating heaters.

Product Details
Chemical composition:

Grade	Ni%	Cu%	Fe%	C%	Mn%	Si%	S%
Monel 400	Min 63	28-34	Max 2.5	Max 0.3	Max 2.0	Max 0.5	Max 0.024

Specifications:

Grade	UNS	Werkstoff Nr.
Monel 400	N0 4400	2.4360

Physical Properties:

Grade	Density	Melting Point
Monel 400	8.83g/cm3	1300°C-1390°C

Mechanical Properties: 

Grade	Tensile Strength	Yield Strength	Elongation
Monel 400	480 N/mm²	170 N/mm²	35%

 
Available Specifications:

Pipe Smls	Pipe Welded	Tube Smls	Sheet/Plate	Bar	Forging	Fitting
B165	B725	B163	B127	B164	B564	B366

 
Available forms:
Monel 400 wire, bar, rod, strip, forging, plate, sheet, tube, fastener and other standard forms are available.

Contact us if you need more details on Copper Nickel Alloy. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Copper Nickel、Copper Nickel Wire. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Monel Alloy