1.6mm Molybdenum Wire for Arc Spray
Basic Info
Model No.: Molybdenum wire
Product Description
Model NO.: Molybdenum Wire Material: Moly Wire PCD: Moly Wire Hole: Moly Wire Surface: Bright Name: Moly Wire Size: 1.6mm Type: Thermal Spray Coaitng Application: Coating Specification: ISO9001 HS Code: 810296000 Product Type: Wire Carbon Content: Moly Wire ET: Moly Wire Brand: Wisdom Place of Origin: Shanghai, China (Mainland) Feature: Bright Certificate: ISO9001 Shape: Wire Trademark: WISDOM Origin: Shanghai, China 1.6mm Molybdenum wire For Arc Spray
Molybdenum wire is a pure (99.95%) molybdenum wire specifically designed for arc spraying.
It produces dense,well-bonded coatings with excellent wear resistance and good corrosion
resistance. It is particularly effective for applications where scuffing or galling is a problem,
such as piston rings, shift forks and
synchronizing rings.
TYPICAL DEPOSIT CHARACTERISTICS
ARC SPRAY COATINGS:
? Typical Hardness HRC 15-20
? Bond Strength 7900 psi
? Deposit Rate 10 lbs /hr/100A
? Deposit Efficiency 75%
? Wire Coverage 1.1 oz/ft2 / m
? Surface Texture *Variable
* Depends on air pressure used.
APPLICATION:
? Wear Resistant Coatings
? Corrosion Resistance
? Anti Galling
? Bond Coats
SURFACE PREPARATION:
Surface should be clean, white metal,
with no oxides (rust), dirt, grease, or oil
on the surface to be coated. Note: It is best
not to handle surfaces after
cleaning.
Recommended method of preparation
is, to grit blast with 24 mesh aluminum
oxide, rough grind, or rough machine in
a lathe.
SPECIFICATION:
PWA 36913C for PWA 271-13 Rev H,
Honeywell FP5045 Type I, Molybdenum
NOMINAL CHEMICAL COMPOSISTION (wt%):
Mo
99.95
RECOMMENDED SPRAY PARAMETERS:
Diameter Air
Pressure
Voltage Amperage Standoff
1/6
(1.6mm)
*50-60 psi *32-34 *100-250 *3-7in(7-
17cm)
1/8
(3.2mm)
N/A N/A N/A N/A
* Parameters are typical and may vary depending on equipment used. Contact
your equipment manufacture for optimum spray parameters.
** 1/8" used for combustion wire spray process, Consult equipment manufacturer
for spray parameters and coating characteristics.
STANDARD SIZES & PACKAGING:
Diameter Packaging Part Number
1/16 (1.6mm) 25# LLWS WISDOM00210
1/8" (3.2mm) 27.5# Coils WISDOM00210 Contact us if you need more details on Molybdenum Wire. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Arc Spray、1.6mm Molybdenum Wire. If these products fail to match your need, please contact us and we would like to provide relevant information.
Molybdenum wire is a pure (99.95%) molybdenum wire specifically designed for arc spraying.
It produces dense,well-bonded coatings with excellent wear resistance and good corrosion
resistance. It is particularly effective for applications where scuffing or galling is a problem,
such as piston rings, shift forks and
synchronizing rings.
TYPICAL DEPOSIT CHARACTERISTICS
ARC SPRAY COATINGS:
? Typical Hardness HRC 15-20
? Bond Strength 7900 psi
? Deposit Rate 10 lbs /hr/100A
? Deposit Efficiency 75%
? Wire Coverage 1.1 oz/ft2 / m
? Surface Texture *Variable
* Depends on air pressure used.
APPLICATION:
? Wear Resistant Coatings
? Corrosion Resistance
? Anti Galling
? Bond Coats
SURFACE PREPARATION:
Surface should be clean, white metal,
with no oxides (rust), dirt, grease, or oil
on the surface to be coated. Note: It is best
not to handle surfaces after
cleaning.
Recommended method of preparation
is, to grit blast with 24 mesh aluminum
oxide, rough grind, or rough machine in
a lathe.
SPECIFICATION:
PWA 36913C for PWA 271-13 Rev H,
Honeywell FP5045 Type I, Molybdenum
NOMINAL CHEMICAL COMPOSISTION (wt%):
Mo
99.95
RECOMMENDED SPRAY PARAMETERS:
Diameter Air
Pressure
Voltage Amperage Standoff
1/6
(1.6mm)
*50-60 psi *32-34 *100-250 *3-7in(7-
17cm)
1/8
(3.2mm)
N/A N/A N/A N/A
* Parameters are typical and may vary depending on equipment used. Contact
your equipment manufacture for optimum spray parameters.
** 1/8" used for combustion wire spray process, Consult equipment manufacturer
for spray parameters and coating characteristics.
STANDARD SIZES & PACKAGING:
Diameter Packaging Part Number
1/16 (1.6mm) 25# LLWS WISDOM00210
1/8" (3.2mm) 27.5# Coils WISDOM00210 Contact us if you need more details on Molybdenum Wire. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Arc Spray、1.6mm Molybdenum Wire. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Thermal Spray Alloy
Premium Related Products
Other Products
Hot Products
B564 Alloy N10276 Corrosion Resistant Nickel Alloy (C-276)Uns S66286 (A-286) Stainless Material 660A/B/C/D for Fastener/Mould ProductsASTM Uns No6625 Saw Welding Wire Inconel 625High Quality Thermocouple Wire Type KHigh Quality High Temperature Alloy Nickel Wire Inconel 718 WiresCeramic TubeFlat Ribbon WireElectric Resistance StripHeat Resistant Electric Wire 0cr21al4 for Electric Heating ElementTop Quality Monel K500 WireConstantan Resistance Wire Copper Wire (CuNi1--CuNi44)Nickel Aluminum 95/5 Thermal Spray Coating WirePure Nickel Strip (Nickel 200/201)China Manufacturer Top-Quality Fecral Alloy BarNichrome Electric Resistance Alloy Wire (Cr20Ni35)Electric Resistance Wire of Fe-Cr-Al