2.0mm Nial80/20 Cored Wire for Bond Coat

Model NO.: NiAl80/20 Powder: Not Powder Product: Nial80/20 Name: 2.0mm Nial80/20 Cored Wire for Bond Coat Certificate: ISO90001 Trademark: Wisdom Origin: Shanghai Type: Nickel Wire Size: 2.0mm Status: Semi-Hard State Color: Bright Form: Wire Specification: 2.0mm
2.0mm NiAl80/20 Cored wire For Bond Coat

DESCRAPTION:
Nickel clad aluminum exothermic coating powder, and the substrate with high strength, mainly used for spraying primer coating having oxidation resistance; but also as a work piece surface coating or repair. And ordinary carbon steel, alloy steel, stainless steel, nitriding steel, cast iron, cast steel, nickel, magnesium, zirconium, titanium, Monel, nickel-chromium alloy can achieve a good metallurgical bond micro.
 

TYPICAL DEPOSIT CHARACTERISTICS:   
? Typical Hardness     HRB 60-75      
? Bond Strength       9100 psi
? Deposit Rate        10 lbs /hr/100A
? Deposit Efficiency    70%
? Wire Coverage      0.9 oz/ft2 / m
? Surface Texture     *Variable
? Machineability      Good
 
 
 
SURFACE PREPARATION:
Surface should be clean, white metal,
with no oxides (rust), dirt, grease, or oil
on the surface to be coated. Note: It is
best not to handle surfaces after
cleaning.
Recommended method of preparation
is, to grit blast with 24 mesh aluminum
oxide, rough grind, or rough machine in
a lathe.
 

APPLICATION:           
? Bond Coat
? Dimensional Restoration
SPECIFICATION:
 
NOMINAL CHEMICAL COMPOSISTION (wt%):
Al  Ni
20  Bal

80Ni   20Al
 
RECOMMENDED SPRAY PARAMETERS:

Diameter	Air Pressure	Voltage	Amperage	Standoff
3.17mm	*50 - 60 psi	*29 - 32	*100 - 200	*3 - 6 in (8 - 15cm)

* Parameters are typical and may vary depending on equipment used. Contact your equipment manufacture for optimum spray parameters.
STANDARD SIZES & PACKAGING:
Diameter               Packing             
1/8(3.17mm)         15kg/spool             




 

Contact us if you need more details on Nial80/20. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Bond Coat、2.0mm. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Thermal Spray Alloy